This is to update on completion of Milestone 2 of the project which involved communication on the CAN network with real CAN devices. The major work done in this Milestone involved : Bring UP the CTUCAN device enumerated in first Milestone. Update...
CTUCAN Controller for Linux We updated linux-on-litex kernel config to enable CTUCAN linux driver. The screenshoot below shows the menuconfig to enable CTUCAN driver: Next we had to update the device tree manually to add a section for CTUCAN...
CTUCAN Controller for Linux We updated linux-on-litex project to integrate CTUCAN Controller booting over Linux. The link to the code is available at below link -...
This is to update on the first milestone that is archeived in Libre Car Control project. FPGA board boots up Linux using linux-on-litex-vexriscv Replacing ECP5 with Artix7 We switched from Lattice ECP5 to Xillinx Artix7 FPGA since we found that...
This is introductory post for the project Libre Car Control. This project is funded through the NGI Zero Entrust Fund, a fund established by NLnet with financial support from the European Commission’s Next Generation Internet program. Learn more...